All Products


DT88 Tile and Stone Mortar

Cemimax DT88 is a polymer-modified, cement-based mortar for setting quarry, ceramic and most natural stone (including mosaics) and also for tiles over common interior surfaces, including exterior-grade plywood, as well as over exterior concrete and masonry surfaces. DT88 also can also be used to install porcelain tiles over common interior surfaces as well as exterior, horizontal concrete and masonry surfaces. DT88 is recommended for most tile sizes.

A350 Resilient Floor Adhesive

Dispersion adhesive for resilient synthetic floor and wall coverings in interior areas.

A600 Linoleum Adhesive

A600 is a wet adhesive with a short drying time and meant for interior use. It's a water based dispersion adhesive for linoleum floor coverings on absorbent substrates.

A2000 Wall Coverings Adhesive

A2000 is a dispersion adhesive for resilient synthetic floor and wall coverings in interior areas.

JET MAX-6000 Vinyl Plank Flooring

Cemimax JET MAX-6000 is a very low emission dispersion adhesive for almost all textile coverings, it is therefore a truly universal strong thread-formation, giving reliable adhesion in interior areas.

JET MAX-8000 Carpet Tile Adhesive

Cemimax JET MAX-8000 is a very low emission dispersion adhesive for almost all textile coverings, therefore truly universal strong thread-formation, giving reliable adhesion in interior areas.

Ultramax MS Timber Flooring Adhesive

Ultramax MS is a one component, high performance adhesive sealant based on Hybrid Silyl Modified Polymers. Ultramax MS provides the strength of polyurethane with a weathering resistance and shorter cure times of silicone. The properties that Ultramax Ms is made up of is well suited as a adhesive sealant in the demanding building, construction and engineering industries which provides superb primerless adhesion to all Flooring materials commonly used in these industries. . This innovative and environmentally friendly product cures quickly in ambient temperatures and retains excellent bond strength, elasticity and tear resistance over the years. It skins over in a short time resisting dust and dirt pickup and can be applied in thick layers without shrinking or bubbling. Ultramax MS will not stain and is very compatible with commonly used flooring systems. It will not yellow or crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. Ultramax Ms does not contain solvents, isocyanates and silicones.


CEMITOP Decorative PCT overlay

Our CEMITOP decorative overlay is a cement based levelling compound designed with our range of Grey pigment components. CEMITOP provides a seemless and decorative finished surface with our range of three different Shades of Grey. JETGREY, KRISGREY and MAXGREY are all premixed colours in our 20kg bags for easy application.

ECOTAZ Decorative PCT Cementitous Overlay

ECOTAZ is a Cementitous based levelling compound designed and based on a decorative overlay with Terrazzo Quartz and sand granular components.

TERRAMAX Decorative Floor Finish

Terramax is a cement based leveling compound designed based on Terramax with terrazzo quartz sand component.

Levelling Compounds

DL10 Bulk Filling  Compound

DL10 is an advanced cement and polymer based levelling compound with special aggregate. DL10 is formulated with high flow performance for leveling work on installation of thick layers. It's most suitable for quicksetting preparation solutions and also can be used as a fast set screed with low ratio water mixing.

DL33 Self-levelling compound

DL33 is an advanced cement and polymer based levelling and smoothing compound.DL33 is formulated for leveling work on standard construction in universal areas. DL33 is suitable for internal use on new or existing substrates for trafficable areas that are used internally as a underlayment.

DL55 Levelling Compound

DL55 is an advanced cement and polymer based levelling and smoothing compound. DL55 is formulated for experienced commercial contractors to smooth and level large commercial and retail areas. Once dry it is suitable for the application of vinyl, carpet and tile floor finishes. Unlike normal hydration levellers, DL55 will harden and dry at temperatures down to 10°C.

DL59 Indoor/Outdoor Levelling Compound

DL59 is a cement based leveling compound with very high compressive strength to C40. It's especially suitable for high traffic, heavy wear location. DL59 can be also used as overlays for polished concrete floors.

BICOMAX High Performance Self Levelling Compound

Cemimax Bicomax is a Bi-Components high performance self leveling compound with low odour, fast setting, fast drying, special designed for wet areas , high moisture vapor control subfloor, exterior and suitable for preparing sound internal subfloors prior to the installation of new floorcoverings.
Bicomax is particularly suitable for use over old adhesive residues (including bitumen and carpet tile tackifiers) without the need for priming. Bicomax can be used for patch filling timber floors prior to overlaying with plywood. It is suitable for use in clinical and biologically sensitive areas such as hospitals, laboratories, clean rooms etc. Bicomax mixed with set of Liquid component can be applied to suitably prepared steel decks in light to medium-duty traffic areas.
Bicomax is unaffected by moisture and is suitable for application over damp, clean, uneven concrete and sand/cement screeds, prior to application of Cemimax waterproof surface membranes or direct application. Bicomax is also suitable for use over a wide range of other subfloor types including Cemimax waterproof surface membranes, sand/cement screed, concrete, granolithic, terrazzo, asphalt, steel, old vinyl asbestos tiles, epoxy and polyurethane resins, ceramic and quarry tiles.

Patching Compounds

PP5 Rapid/Ramping Compound

PP5 is an advanced cement and polymer mix that is a highly versatile, rapid drying, patching product. PP5 produces a smooth underlayment that eliminates subfloor issues prior to the installation of flooring. It's fine aggregates allow it to be installed from a feather edge up to high fill depth in one application. Superior bonding allows it to applied over concrete, existing well bonded flooring, properly prepared non-water soluble adhesive, and well bonded gypsum all without having to use primer in most applications. PP5 is a perfect solution for filling holes,crack repair, ramping, and embossing leveller. Indoor and outdoor use.

PP3 Feather Edge Smoothing Compound

PP3 is an advanced cement and polymer based patching compound for repair, filling and patching up to 13mm depth. Can be used on a variety of substrates prior to installation of most flooring products. Priming is not required for most applications.


DP60 Primer

DP60 is a dispersion primer with a wide range of applications, for interior use only.

DP80 Non-Porous Primer

DP80 is a water based, very low emission, acrylic, dispersion, film forming primer that enhances the performance and bonding of Cemimax Self-Leveling products that are to be installed over existing well bonded flooring (quarry, porcelain, and ceramic tile; VCT, Sheet Vinyl; Terrazzo; Metal Decking, and Rubber), and well bonded non-water soluble adhesive residue. It can also be used directly over Cemimax high quality 100% solids epoxy and polyurethane (PU) based primers/ moisture vapor retarders (MVR)/ barriers.

DP400 Epoxy Resin Primer

Cemimax DP400 is a two component solvent free Epoxy resin primer, used to improve the strength of the substrates. It can be used as crack repair for concrete, cement-based subfloors or as moisture vapor retarder for concrete substrates with high residual moisture.

DP70 Dispersion Primer

DP70 is a dispersion primer with a wide range of applications. It can be used for both interior and exterior - providing that the overlayment compound DL10 or DL59 is applied within drying time of primer. It's not to be left exposed to the elements for more than 2 hours.

Contact Us